Hood Struts Ford F-150 Replacement: Top Picks And DIY Guide

Replacing Ford F-150 hood struts is quick, cheap, and improves safety.

You pop the hood to check the oil. It creeps down. You wedge a broomstick to hold it up. Been there? Weak hood struts are more than annoying. They can be dangerous. The right Hood Struts Ford F-150 Replacement fixes this in minutes. You get a smooth lift, a steady hold, and no more slammed fingers. Below, I share my top picks, expert tips, and honest pros and cons, so you can buy once and install with confidence.

1

Top Pick

Euplokeer FL34-6C827-AB Hood Struts (2015–2020 F-150)

A value-packed pair for 2015–2020 F-150. Smooth lift, easy clip-on install, solid hold without slam.

Check Latest Price

2

Best Quality

Heavy Duty Hood Struts (2015–2020 F-150, Excl. Raptor)

Heavy-duty gas springs for frequent hood use. Crisp lift with sturdy damping for windy days and driveway work.

Check Latest Price

3

Recommended

4153 Hood Lift Supports (2004–2008 F-150/’08 Mark LT)

Budget-friendly 4153-spec pair with plug-and-play ends. A strong fix for aging 11th-gen trucks.

Check Latest Price

Euplokeer FL34-6C827-AB Hood Struts (2015–2020)

This Euplokeer set replaces FL3Z-16C826-B on 2015–2020 Ford F-150. The ends snap on the factory ball studs. No drilling. No special tools. The lift feels smooth. The hold is firm at full height. If your hood starts sagging in wind, this set brings back confidence fast.

I like how the damping slows the last inch. It helps when kids are near the truck. The finish resists rust and road grime. That is useful in salt zones. If you wrench on your F-150 often, these save your arms. They turn a two-hand job into a one-hand lift. It is a simple Hood Struts Ford F-150 Replacement that pays for itself.

Pros:

• Direct fit for 2015–2020 F-150, OE-style ends
• Smooth lift with steady top hold
• Quick install with flathead or pick tool
• Rust-resistant finish for winter roads
• Great value for daily drivers
• Safe close with controlled damping

Cons:

• Not listed for Raptor trims
• Gas charge may feel light in very cold weather
• Packaging can vary by batch

My Recommendation

Choose this if you need an easy Hood Struts Ford F-150 Replacement for a 2015–2020 truck. It balances price and performance. It keeps the hood steady. It installs in minutes in your driveway. If you have stock hood weight and want reliable daily use, this is a strong pick.

4153 Hood Lift Supports (2004–2008 F-150)

This 4153-spec pair fits 2004–2008 Ford F-150 and 2008 Lincoln Mark LT. It is a straightforward Hood Struts Ford F-150 Replacement for the 11th-gen truck. If your hood drops fast or needs a shoulder bump to rise, these restore the lift. The ball sockets clip onto the original studs with a gentle press.

The gas pressure feels well matched to the steel hood. The open height is consistent. The set is a wallet-friendly fix for aging supports. If you do maintenance at home, it keeps the hood secure while you work. No more broom handle. No more sudden dips in wind gusts.

Pros:

• Correct 4153 spec for 2004–2008 F-150
• Budget price with solid hold
• Simple install in under 10 minutes
• Improves safety during engine work
• Works with stock hood hardware
• Predictable damping at full open

Cons:

• Finish may show wear if uncleaned in winter salt
• May not suit aftermarket heavy hoods
• Brand support information can be limited

My Recommendation

If you own a 2004–2008 F-150, this is an easy Hood Struts Ford F-150 Replacement. It is best for stock hoods and daily use. It solves sagging and prevents slam. The price-to-performance ratio is strong for trucks that need a quick refresh.

2pcs Hood Struts 4153/SG404075 (2004–2008)

This pair replaces part numbers 4153 and SG404075 for the 2004–2008 Ford F-150 and 2008 Lincoln Mark LT. It is a direct Hood Struts Ford F-150 Replacement with the right end fittings. The gas springs push the hood up without the “dead zone” you feel with old struts. The lift curve is smooth and predictable.

Installation is quick. A flat screwdriver lifts the metal retainer clip. Then you pop the new unit on the ball stud until it clicks. The set improves the safety feel when you check coolant or belts. If you store tools on the radiator cover, you will like the steady open height.

Pros:

• Correct cross-refs: 4153 / SG404075
• Steady open height for engine bay work
• Clean damping near the top of travel
• Snap-on ends reduce install time
• Good value for older F-150s
• Works with factory ball studs

Cons:

• Brand recognition may be lower than OE
• May feel stiff for first few cycles
• Finish could use extra corrosion coating

My Recommendation

Pick this set when you want a straightforward Hood Struts Ford F-150 Replacement for an 11th-gen truck. It gives you a balanced lift rate and solid hold. It is ideal for owners who service their own rigs. The value is strong if your old struts have lost charge.

SYKRSS 4153 Hood Struts for F-150 04–08

The SYKRSS pair covers F-150 2004–2008 and Mark LT 2008. It cross-references SG404075, 8196257, and RB8795310, which helps verify compatibility. The lift is assertive but controlled, which I like in windy driveways. The ends use metal clips that feel sturdy, not flimsy.

For an older truck, this Hood Struts Ford F-150 Replacement gives an instant upgrade in safety and ease. Pop the hood with one hand and it rises without drama. The open position is high and stable. That makes belt checks and battery swaps less of a fight.

Pros:

• Wide cross-ref for easy fit check
• Firm lift rate ideal for worn hinges
• Solid metal clip hardware
• Good open height stability
• Quick, tool-light installation
• Works well in mild cold

Cons:

• Brand premium may be higher than generic sets
• New-strut stiffness for first few openings
• Finish can show marks if scratched during install

My Recommendation

If you want a confident lift feel on a 2004–2008 truck, this Hood Struts Ford F-150 Replacement is a smart bet. It gives you assertive lift without harsh slam at the end. It is great for owners who open the hood often for mods or checks.

Heavy Duty Hood Struts 2015–2020 F-150

This heavy-duty set fits 2015–2020 Ford F-150 (excluding Raptor) and replaces FL3Z-16C826-B. If you open the hood often, the lift feels crisp and confident. The gas charge resists wind push better than tired OE struts. The damping at full open helps protect hinges and hands.

As a Hood Struts Ford F-150 Replacement, it shines for frequent maintenance or mod work. The hardware feels robust. The action is consistent even after many cycles. If you live in a windy or hilly area, the stronger hold at the top is a real perk.

Pros:

• Heavy-duty feel for frequent use
• Steady hold in windy conditions
• Direct fit with OE-style sockets
• Strong damping at full extension
• Great for driveway mechanics
• Improves safety over weak stock units

Cons:

• Not for Raptor models
• May feel stiff with lightweight aftermarket hoods
• Usually priced higher than base options

My Recommendation

Choose this if you want the most confident 2015–2020 Hood Struts Ford F-150 Replacement without going full custom. It is ideal for owners who open the hood often. It helps in gusty weather or on slopes. It trades a bit of cost for a lot of peace of mind.

FAQs Of Hood Struts Ford F-150 Replacement

How do I know my hood struts are failing?

The hood sags, drops fast, or needs help to lift. You may hear hiss or see oil film. If wind moves the hood at full open, replace them.

Can I replace F-150 hood struts myself?

Yes. Support the hood with a prop. Pry the metal clip slightly. Pop the old one off and snap the new one on. Swap one side at a time.

Do I need special tools?

No. A flat screwdriver or pick tool is enough. Wear gloves and eye protection. Work on level ground with a secure hood prop.

Will cold weather affect new struts?

Yes, gas struts feel stiffer in cold. That is normal. Quality units still hold the hood and smooth out as they cycle.

Should I grease the ball studs?

Clean the studs. Use a light silicone spray if needed. Do not pack with heavy grease. Keep the retaining clips clean.

Final Verdict: Which Should You Buy?

The Euplokeer set is the Top Pick for most 2015–2020 owners. It is an easy Hood Struts Ford F-150 Replacement with smooth lift and fair price. The heavy-duty 2015–2020 option suits frequent hood access or windy areas.

Own a 2004–2008 truck? The 4153 pair offers strong value and simple fit. Any of these picks will make your Hood Struts Ford F-150 Replacement fast, safe, and stress-free.

AKM Sad

Hi, I am AKM Sad. I’m a car enthusiast and reviewer who loves exploring gadgets and accessories. I share honest reviews and practical tips to help you get the best products and enjoy a safer, smoother ride.