5 Best Can-Am Maverick R Rear Bumpers for Trail Protection

Rear Bumper Protection A quality rear bumper shields your vehicle from trail debris and impact, protecting the chassis structure.

A rear bumper for your maverick protects the body panels and taillights when a sudden rock or thick branch threatens the machine on the trail. This accessory prevents damage that can occur during a moment of distraction.

A sturdy rear bumper provides a critical layer of defense, absorbing energy and deflecting impacts before they reach your frame. Finding the right guard helps you focus on the ride ahead rather than worrying about potential damage to your investment.

1. XATVXUTV Rear Bumper

Buy on Amazon

Best for: Riders wanting a direct, factory-style fitment for their machine.

This bumper is built from heavy-duty steel tubing and features a sleek black powder coat. It’s designed to replace OEM part #715007172 and fits a wide range of Maverick R models. The structure is meant to redistribute impact forces away from the vehicle frame during off-road use.

Installing this unit is straightforward as it attaches directly to factory mounting points without needing extra drilling. The anodized surface provides a high-gloss look that resists rust and corrosion in various weather conditions. However, this model isn’t compatible with Maverick X3 models, which may limit its use for owners with multiple machines.

Pros

• Fits a wide range of Maverick R models
• Direct replacement for factory OEM part
• Heavy-duty steel tubing construction
• No drilling or modifications required for install
• High-gloss finish resists rust and corrosion

Cons

• Not compatible with any Maverick X3 models

Why this one: If you want a clean look that matches your factory setup, this is a strong choice. It’s simple to install and provides the necessary protection for typical trail debris. Owners of other Can-Am models should look elsewhere, as this is specific to the Maverick R line.

2. KEMIMOTO Rear Bumper Black Compatible with 2024+ Can-Am Maverick R

Buy on Amazon

Best for: Owners who need a functional step to reach their cargo.

This bumper features a 38mm steel tube diameter and 2mm thick walls for structural support. It includes a serrated step design on the lower portion, which gives you a stable place to stand when accessing the truck bed or roof. The electrophoretic coating and black powder finish are designed for durability. Unlike products that rely on simple spray paint, this dual-layer process prevents rust from compromising the steel.

The design follows the lines of the Maverick R to maintain a sleek, metallic look. While the step is useful, its longer design means it occupies more space at the rear of the vehicle. It’s a bolt-on solution that replaces OEM#715007172, making installation quick for those comfortable with basic tools. If you’re worried about clearance on tight trails, remember that the extended profile is the trade-off for that extra utility.

Pros

• Includes a convenient serrated step design
• Durable electrophoretic and powder coat finish
• Thick steel walls for high impact resistance
• Matches factory body lines closely
• Simple bolt-on installation process

Cons

• Longer profile may extend further than stock

Why this one: Choose this if your ride involves frequent cargo loading or roof access. The integrated step is a thoughtful addition for utility. If you prioritize a compact, flush-fitting bumper for aggressive rock crawling where every inch of departure angle matters, you might consider other options that don’t have the extended step. If you need a reliable, all-weather upgrade that installs in minutes, this is the right choice.

3. Elektric Offroad Volt Bumper

Buy on Amazon

Best for: Those who need to maintain their backup camera functionality.

The Volt Series is constructed from high-strength steel and features a hammer black powder coat. It includes a satin black aluminum skid plate for added lower rear protection. A unique feature is the integrated backup camera relocation provision, which ensures you keep rear visibility after mounting the guard.

This bumper is tailored for the 4-seat Maverick R Max, providing coverage for tail lights and chassis zones. The design is Baja-inspired, focusing on a balance between protection and a modern look. Because it’s built specifically for the 4-seat model, it isn’t suitable for 2-seat configurations.

If you’re installing this, ensure you have the 2024 or newer 4-seat chassis. Stick to the bolt-on installation; no cutting or fabrication is required, and any attempt to modify the steel will compromise the powder coat’s corrosion resistance.

Pros

• Integrated backup camera relocation provision
• Includes an aluminum skid plate
• Rugged hammer black powder coat finish
• Designed specifically for 4-seat models
• Protects tail lights and impact zones

Cons

• This accessory is exclusively compatible with the extended Maverick R Max chassis.

Why this one: This is the best pick for 4-seat owners who prioritize visibility and lower-chassis coverage. The camera relocation is a major benefit for safety. If you own a 2-seat Maverick R, this model won’t fit, so you should check other options.

4. AUPOWER Heavy Duty Rear Pre-Runner Bumper

Buy on Amazon

Best for: Riders seeking a rugged, pre-runner aesthetic for their machine.

This bumper utilizes 1.75-inch steel tubing and a dual-layer anti-corrosion coating to withstand harsh environments. It’s a direct replacement for the OEM part #715007172 and uses expanding anchor technology for a secure, modification-free install. The design aims to protect against stumps and brush during off-road adventures.

The pre-runner style provides an aggressive appearance while maintaining the performance of your vehicle. It has been tested for 500+ hours in real-world conditions to handle various terrains, from rocky paths to wooded trails. Because it emphasizes a slim, pre-runner profile, it may not offer as much surface area coverage as a full-coverage brush guard.

If you ride through dense, overgrown brush, choose a wider bumper to prevent body panel damage. If you prioritize quick trail readiness and a lightweight, aggressive look, this pre-runner model is the superior choice.

Pros

• Strong 1.75-inch steel tubing construction
• Dual-layer anti-corrosion coating
• Uses expanding anchors for secure mounting
• Aggressive pre-runner styling
• Validated for extreme impact resistance

Cons

• Slim profile offers less full-body coverage

Why this one: If you prefer the pre-runner look, this bumper hits the mark. It’s very easy to install and holds up well against trail impacts. If you’re looking for maximum coverage of the entire rear end, you might prefer a wider brush guard design. Always review the supplied manual before starting to ensure proper setup on your Maverick R or R MAX.

5. CUSAUTV Rear Combined Bumper Compatible with 2024+ Can-Am Maverick R

Buy on Amazon

Best for: Riders who prioritize maximum impact dissipation.

This combined bumper uses heavy-duty steel tubing to provide impact resistance. It’s coated in black powder to protect against corrosion in mud and wet conditions. The structure is engineered to transfer impact forces across the body, which helps mitigate damage to the vehicle frame and the driver.

Use this bumper if you frequently navigate trails with stumps and rocks. If you drive a Maverick X3, avoid this unit entirely; it’s designed exclusively for 2024+ Maverick R and 2025+ Maverick R Max models. Installing it on an incompatible chassis will result in a poor fit that compromises your safety.

The installation is a screw-based assembly that mounts to the rear of the machine without drilling. While it provides strong protection, the combined design is heavier than basic guards. If every pound counts for your specific racing setup, the added mass of the steel tube may hinder your performance.

Pros

• Engineered for superior impact force dissipation
• Heavy-duty steel tubing construction
• Fits both R and R Max models
• No drilling required for installation
• Durable black powder coating

Cons

• Heavier construction than basic bumper models

Why this one: This is a solid choice for those who push their vehicles hard on rocky or debris-filled terrain. It offers excellent structural protection. If weight is a major concern for your racing or trail setup, you might look at a lighter pre-runner style bumper instead. Always check the full compatibility list before purchase to ensure your specific trim, including Smart-Shox variants, is supported.

How to Choose Yours

Picking the right bumper depends on your specific trail habits and the terrain you encounter. Don’t just look at the longest feature list; focus on what solves your specific problems.

If you frequently access the cargo bed or need to reach the roof, prioritize models with a serrated step design for better grip. If you rely on your factory backup camera, look for options that specifically include integrated relocation provisions, as some designs may obstruct your current view.

If you ride in tight, wooded areas, seek out heavy-duty steel tubing that redistributes impact forces to protect your chassis. For those in harsh, wet, or salty environments, choose bumpers with dual-layer anti-corrosion coatings, such as electrophoretic finishes combined with powder coats, rather than basic paint.

Verify your model year and seating capacity, as some bumpers are tailored specifically for the extended-length Maverick R MAX. Finally, confirm the design is a direct bolt-on replacement for OEM #715007172 to ensure you avoid drilling or fabrication during installation.

Frequently Asked Questions

Will this bumper affect my vehicle warranty?

Manufacturers often provide guidance on how to maintain your Can-Am vehicle warranty when adding modifications. Always check your owner’s manual or consult your local dealer if you have concerns about structural changes.

Is the installation difficult for a beginner?

Most of these bumpers are designed for bolt-on installation, meaning they use existing factory holes and mounting points. You’ll generally only need basic hand tools like a socket set and a wrench. Most listings include a detailed manual or a video link to help you walk through the process safely.

Do I need to remove my stock bumper first?

Yes, most of these products are designed as direct replacements for the factory OEM bumper. You’ll need to remove the stock hardware before attaching the new guard. Keep your original hardware in a safe place in case you ever need to return the vehicle to its factory state.

Can I install these bumpers by myself?

While it’s possible to install these alone, having a second person makes the process much easier. A second set of hands can help hold the bumper in place while you align the bolts and tighten the hardware. This prevents the metal from scratching your bodywork during the alignment phase.

Will these bumpers rust over time?

These products use powder coating and other anti-corrosion treatments to resist rust and weathering. However, if the finish is scratched deeply by a rock or a hard impact, the bare steel beneath can start to rust. Touching up deep scratches with a matching black paint can help extend the life of your bumper.

Is a rear bumper really worth the investment?

A rear bumper is a preventative measure that protects body panels, tail lights, and chassis components from trail damage. When you consider the effort of replacing even a single plastic panel or a broken light assembly, a steel bumper serves as a protective addition for your machine.

The Verdict for Most People

The XATVXUTV Rear Bumper is the best choice for most Maverick R owners because it offers a perfect balance of durability and factory-style fitment. It covers the essential needs of trail protection without the extra bulk or specific requirements of the more niche models.

If you specifically need to use your backup camera, the Elektric Offroad Volt Bumper includes a relocation provision. If you require a step to reach your cargo or roof, choose the KEMIMOTO or WeiSen bumpers, which feature dedicated serrated or slip-resistant platforms.

Those prioritizing maximum structural integrity should favor one-piece steel designs, which eliminate the weak joints found in multi-piece alternatives. Always verify your specific seat count and model year against the manufacturer’s compatibility list before purchasing. Failing to confirm these details can lead to fitment issues, as these bumpers aren’t compatible with Maverick X3 models.