How To Reset Maintenance Light On Toyota Camry: Quick Guide

You’re here because that maintenance light on your Toyota Camry is on, and you want it gone the right way. I’ve reset dozens of these, from older Camrys with simple odometers to the latest models with touchscreen menus. In this guide, I’ll show you exactly how to reset maintenance light on Toyota Camry, why it turns on, and what to check first. You’ll get clear steps for each model year range, simple language, and pro tips from real-world experience. Follow along, and you’ll be done in minutes.

What The Maintenance Light Means

The maintenance required light is a friendly reminder. It turns on after a set number of miles. It usually follows an oil change interval. It does not mean the car is unsafe. It does not mean a system has failed. It is a timer based on distance driven.

Most Camry models trigger it around 5,000 miles. Some shops reset it during service. If they forget, you can reset it yourself. Still, always be sure the service is done before you clear it. This keeps your records honest and protects your engine.

Before You Reset: Quick Checks

Make sure you completed the service that was due. At minimum, confirm the oil and filter are fresh.

Do a quick walkaround:

• Check engine oil level and color. Oil should be at the correct level and look clean.
• Look at tire pressures. Inflate to the door placard spec.
• Inspect air filter and cabin filter. Replace if dirty.
• Review your last service date and mileage. Log the new numbers after reset.

Resetting without service can cause you to miss real maintenance. That can hurt fuel economy and engine life.

Reset Steps By Model Year

Different Camry generations use different menus. Find your year range below and follow the steps. Use the trip meter buttons for older models. Use the steering wheel buttons and screen on newer ones.

2007–2011 Toyota Camry (Analog Odometer, TRIP A)

– Turn the ignition switch to ON. Do not start the engine.
– Press the trip button until the display shows TRIP A.
– Turn the ignition OFF.
– Press and hold the trip button.
– While holding, turn ignition to ON. Do not start the engine.
– Keep holding until the odometer shows dashed lines or zeros. The light will turn off.
– Release the button. Turn the car off, then on to confirm.

2012–2017 Toyota Camry (Multi-Information Display With Steering Buttons)

– Turn ignition to ON. Do not start the engine.
– Use the steering wheel buttons to navigate to the gear/odometer screen.
– Set the trip meter to TRIP A.
– Turn ignition OFF.
– Press and hold the kilometer-per-hour/trip button or the trip stalk button.
– While holding, turn ignition to ON. Do not start the engine.
– Continue holding until the maintenance reset completes and the indicator turns off.

Tip: If your trim has a DISP button instead of trip, hold DISP during the ON cycle.

2018–2024 Toyota Camry (MID and Settings Menu)

– Turn ignition to ON or press Start twice without pressing the brake.
– Use the left steering pad to open the main menu on the instrument screen.
– Scroll to the gear icon for Settings.
– Select Maintenance Reset or Vehicle Settings, then select Maintenance Reset.
– Confirm the reset when prompted. The screen will say “Reset Completed” or similar.
– Turn the car off, then start it to verify the light is gone.

Hybrid note: Procedure is the same. Make sure the car is in ON (ready-off) mode, not READY, when starting the reset.

If your menu shows Oil Maintenance and Maintenance Schedule as separate items, reset Oil Maintenance after an oil change, and use Maintenance Schedule for broader checks.

Troubleshooting If The Light Won’t Reset

Try these quick fixes:

• Wrong trip screen: Many models require TRIP A, not TRIP B or ODO. Switch to TRIP A.
• Timing off: You must hold the button before turning ignition to ON. Keep holding until the countdown finishes.
• Start versus ON: Do not start the engine during the reset. Use ON mode only.
• Weak 12V battery: Low voltage can interrupt the reset. Check battery health.
• Different menu labels: Some trims hide Maintenance Reset under Vehicle Settings. Explore all options.
• Software updates: Newer models may have slightly different wording. Follow prompts that mention oil or maintenance.

If the light returns right away:

• Confirm the oil change reminder interval is set correctly in the menu.
• Check for a check engine light. That is a different warning and will not clear with a maintenance reset.
• Verify mileage since last reset. If a shop set a very short interval, it could re-trigger early.

Pro Tips From The Garage

Real-world notes that save time:

• Keep the driver door closed during the reset. Some models cancel the process if the chime sounds.
• Use a steady button press. Quick taps can miss the timing.
• Log your reset date and miles in your phone. It helps with resale and warranty claims.
• If you DIY oil changes, use the correct viscosity and API rating. Camry engines are sensitive to oil quality.
• When in doubt, glance at the owner’s manual. The reset steps are standard, but small differences exist by year and trim.

A quick story: I once spent 10 minutes trying to reset a 2015 Camry. The fix was simple—I had it on TRIP B. Switched to TRIP A, and it reset in five seconds. Small details matter.

How Often To Service And Reset

Follow your maintenance schedule. Many Camry models use 5,000-mile reminders for rotations and checks. Oil change intervals vary by driving style and oil type.

Simple rules of thumb:

• Conventional oil: 5,000 miles or 6 months.
• Synthetic oil: 7,500 to 10,000 miles, or 12 months, if your manual allows it.
• Severe service: Short trips, lots of idling, extreme temps. Shorten intervals.

Always go by your owner’s manual first. Use the maintenance reset only after service so your alerts stay accurate.

Frequently Asked Questions Of How To Reset Maintenance Light On Toyota Camry

Does the maintenance light mean something is broken?

No. It is a mileage-based reminder. It prompts you to do service like oil changes and inspections.

Can I drive with the maintenance light on?

Yes, for a short time. But schedule service soon. Long delays can harm the engine.

Will disconnecting the battery reset the maintenance light?

Sometimes, but it is not recommended. You may lose radio presets and other settings. Use the proper reset steps.

Why does the light come back after I reset it?

The interval may be set very short, or service was not completed. Also confirm you reset Oil Maintenance, not just a general reminder.

Is the process different for Camry Hybrid?

The steps are the same. Make sure the car is in ON mode, not READY, when performing the reset.

Where do I find the Maintenance Reset on newer models?

Open the instrument cluster menu, go to the gear icon for Settings, and select Maintenance Reset or Oil Maintenance.

Conclusion

You now know how to reset maintenance light on Toyota Camry the right way. Start by confirming the service, then use the steps for your model year. Small details like TRIP A and ON mode make all the difference. Keep a simple log, follow your manual, and your Camry will reward you with smooth, reliable miles.

Ready to put this into practice? Reset your reminder, set a calendar note for your next service, and share this guide with a friend who drives a Camry. Want more tips like this? Subscribe, leave a comment with your model year, or ask a question below.

Watch This Video on how to reset maintenance light on Toyota Camry