7 Best Black Friday Running Board Deals to Grab

Best overall: Tyger Auto Riser Running Boards — a 6-inch factory-style step in aluminum tubing, with both sides, all brackets, no drilling and a 3-year defect warranty. Most robust build: Tyger Auto Trax Side Steps — a 2-inch carbon steel dual-tube design with a textured black powder coat, built as a steady step rather than a wide platform. Best ground clearance: MaxMate Oval Nerf Bar Steps — 3.5-inch oval tubes that keep the bar tucked close, with pre-welded endcaps so water and dirt have nowhere to sit.

The rest of this guide walks through every black friday running board deal, who each one suits, and what to check before you order.

How We Picked

We looked at Amazon listings for truck and SUV running boards and kept the ones whose sellers actually state the facts a buyer needs. Fitment had to be spelled out by year, make and cab size, because a running board that misses your cab style is scrap metal. We also looked for a stated weight capacity, what’s in the box, and whether the seller covers the product afterward. Anything vague on fitment, or with no stated capacity, dropped out. The seven picks below are the listings that answered those questions in their own words.

1. Tyger Auto 6″ Riser Running Boards Compatible with 2019-2026 Chevy

Price on Amazon

Best for: the daily driver who wants a factory look

This is a 6-inch ultra-wide step in heavy-duty triangle aluminum tubing, finished in satin black powder coat. The listing calls it factory-style, and that’s the point: it meshes with the truck’s own look instead of shouting over it. Aluminum keeps the bar light on the truck, and the UV-resistant step pads are there for wet boots and muddy mornings.

The listing states a 500 lb weight capacity, roughly 9 inches of ground clearance, and no drilling — a bolt-on job it says can be done in 20 minutes. Both sides, all hardware and brackets are in the box, and TYGER covers it for 3 years against manufacturing defects for US customers. Fitment runs across 2019-2026 Silverado and Sierra 1500, 2020-2027 2500 and 3500 HD, and diesel models with DEF tanks, Crew Cab only.

It’s not for you if you drive a Double Cab or an Extended Cab — the listing says Crew Cab with four full-size doors only. It’s also not the pick for someone who wants maximum clearance under the rocker, since the listing puts ground clearance at about 9 in.

Pros

• 6-inch wide step pad for confident footing
• Aluminum tubing with satin black powder coat
• 3-year warranty against manufacturing defects

Cons

• Crew Cab only, four full-size doors
• About 9 in ground clearance, lower than slim tubes

2. Tyger Auto Trax Side Steps Compatible with 2019-2027 Ram 1500

Price on Amazon

Best for: the owner who steps in and out all day

The Trax is a dual-tubular design in 2-inch diameter carbon steel, with a dual-stage textured black powder E-coat for rust and corrosion resistance. The listing’s claim is a steady, robust step, and the dual-tube structure is what backs that up.

Ground clearance is listed at about 12 inches, so the bar tucks up higher than a wide board, and the capacity is 500 lb. Both side bars, all hardware and brackets are included, no drilling is needed, and the listing puts installation at around 20 minutes. TYGER’s US warranty against manufacturing defects applies here too.

Skip it if you drive a Quad Cab or Mega Cab, or a 2019-2024 Ram 1500 Classic — the listing rules all three out. It also won’t suit someone who wants a broad, flat surface underfoot.

Pros

• Dual-tube carbon steel, 2 in diameter
• Textured black powder E-coat finish
• About 12 in ground clearance

Cons

• Not for Quad Cab, Mega Cab or Classic
• Narrower footing than a flat board

3. COMNOVA 6 Inches Running Boards& Steps Step Bars Compatible

Price on Amazon

Best for: the buyer who wants to fine-tune step position

These are 6-inch running boards in heavy-duty carbon steel with anti-slip plastic steps, powder coated with a glitter finish the listing says helps with rust prevention. The design detail that sets them apart is a patented slider: the bar can move forward and backward on the truck, so you can line the step up where your foot actually lands rather than where the factory bracket happens to sit.

Each side is listed at up to 500 lb. There are four brackets per side in a non-welded design, it’s a direct bolt-on with no drilling, and the package covers both sides. Fitment is 2019-2026 Silverado 1500 Crew Cab and 2020-2026 Silverado or Sierra 2500HD and 3500HD Crew Cab, new body style, four full-size doors only.

It isn’t for 2019 Silverado or Sierra 2500 and 3500, and not for 2019 Silverado and Sierra 1500 LD or Limited — the listing says so plainly. If you want a simple bar with nothing to adjust, the slider is extra hardware you’ll never touch.

Pros

• Slider adjusts forward and backward
• 6-inch wide step, 500 lb per bar
• Bolt-on, no drilling required

Cons

• Excludes 2019 LD, Limited and 2500/3500
• Four brackets per side to line up

4. COMNOVA Aluminum Running Boards Compatible with 2017-2025 Honda Ridgeline

Price on Amazon

Best for: Ridgeline owners in snow and road salt

Built for the 2017-2025 Honda Ridgeline, these are 6.5-inch aluminum boards with non-slip plastic pads and a powder coat the listing describes as glitter-finished for rust prevention. The aluminum is not easily oxidized by corrosive liquids and resists rust and corrosion in stormy and snowy environments.

The 6.5-inch width provides more foot room, and that the step pads increase friction between boot and bar. There’s a slider for forward and backward adjustment, uniquely shaped end caps to take impacts, and a direct bolt-on install with no drilling. Each bar is listed at up to 500 lb, and the box has two steps, brackets, hardware and instructions.

This one is Ridgeline-only, so it’s no use on a Silverado or an F-150. And if you want a step that sits up high for clearance, the wide 6.5-inch board is the wrong shape for that.

Pros

• Aluminum resists rust and corrosion
• 6.5-inch width for more foot room
• Slider allows forward and back adjustment

Cons

• Fits 2017-2025 Honda Ridgeline only
• Wide board sits lower than slim tubes

5. MaxMate 3.5″ Oval Nerf Bar Side Steps Compatible with 2019-2026

Price on Amazon

Best for: the buyer who wants clearance kept intact

MaxMate’s angle is the 3.5-inch oval tube: wide enough to stand on, narrow enough to leave more room underneath. The listing says the endcaps are pre-welded, giving seamless unibody bars, and that detail matters more than it sounds — a capped tube has no open end for water and dirt to collect in and corrode from the inside. Carbon steel tubes get a matte black E-coat for strength and rust resistance.

Ground clearance is listed at about 12 inches, capacity at 500 lb, and the step pads are UV-protected. Both driver and passenger steps come with all brackets and hardware, mounted to the rocker panel with no drilling. MaxMate backs it against manufacturer defects for US customers.

The catch is cab size. This is for Extended Cab and Double Cab only — two full-size front doors and two narrower rear doors — and not for Crew Cab with four full-size doors. It also won’t fit a 2019 Silverado 1500 LD or Sierra 1500 Limited.

Pros

• About 12 in ground clearance
• Pre-welded endcaps seal the tube ends
• 500 lb capacity, 3-year warranty

Cons

• Double Cab and Extended Cab only
• 3.5-inch tube is narrower underfoot

6. YITAMOTOR F150 Running Boards

Price on Amazon

Best for: older F-150 owners who want a wide step

These 6-inch stainless steel boards are built for the 2004-2014 Ford F-150 SuperCrew Cab, a generation that’s now old enough that finding a clean-fitting step matters. Stainless steel is the headline: the listing claims exceptional corrosion and rust resistance, which is the material you want if the truck lives outside. Each side handles up to 500 lb.

The step surface is textured powder coated, and the listing says the bump design improves slip resistance while giving the truck a more aggressive look. Installation needs no drilling or cutting, and the slider lets you shift position back and forth for a smoother fit. The generous width gives plenty of stepping space for passengers who need it.

It’s SuperCrew Cab only and 2004-2014 only, so a 2015 or newer F-150 owner should look elsewhere. The listing also doesn’t state a ground clearance figure, so if clearance under the rocker is your deciding factor, you won’t find that number here.

Pros

• Stainless steel resists rust and corrosion
• Wide stepping surface
• No drilling or cutting required

Cons

• Fits 2004-2014 F-150 SuperCrew only
• No ground clearance figure listed

7. YITAMOTOR Colorado Canyon Steps

Price on Amazon

Best for: Colorado and Canyon owners hauling passengers

These 6-inch step rails fit the 2015-2026 Chevy Colorado and GMC Canyon Crew Cab, and the listing says they’re engineered to match the manufacturer’s mounting points for a no-drill install. The build is full stainless steel with reinforced ABS, rated at 450 lb per side — a lower figure than the 500 lb bars above, so if you regularly carry the heaviest passengers, that number is worth knowing.

The reverse-side adjustable slider moves the step forward or backward so each passenger can find a comfortable position. Oversized pedal grips are there for wet, icy, muddy or dusty conditions, and the listing promises stable footing in all of them. Black end caps guard against bumps, and the stainless surface is described as wiping clean in seconds.

It’s Crew Cab and Colorado or Canyon only, so it won’t help a Silverado owner. And at 450 lb per side, it’s the lowest listed capacity in this group.

Pros

• Adjustable slider for ideal step position
• Oversized grips for wet or icy footing
• Stainless steel wipes clean quickly

Cons

• 450 lb per side capacity
• Fits Colorado and Canyon Crew Cab only

Find Your Perfect Black Friday Side Steps Deals

Side steps provide a steady platform for entering taller vehicles and help protect the body from road debris. When browsing Black Friday Side Steps Deals, focus on the material and finish to ensure they match your vehicle’s style. Verify that the selected parts are compatible with your specific make and model before completing a purchase.

Top Black Friday Nerf Bars Deals

Nerf bars are ideal for those seeking a streamlined look and easy cabin access. These Black Friday Nerf Bars Deals offer various grip textures to keep your footing secure in wet or snowy weather. Many owners prefer these for their durability and the extra protection they provide against side impacts.

Quality Black Friday Power Running Boards Deals

Electric options provide a clean profile by retracting when the doors close. Shoppers looking at Black Friday Power Running Boards Deals should prioritize weatherproofing and motor reliability. Since stock and offers fluctuate rapidly during the holiday rush, check the current price and availability before buying.

Also Worth Considering

Three more listings are worth a look if none of the above lines up with your truck.

COMNOVA AUTOPART F250 Running Board fits 2017-2026 Ford F250 Superduty Crew Cab, with a 6-inch V-style nerf bar in carbon steel and OE-style brackets. The V profile is the differentiator here — it’s a shaped bar rather than a flat board.

Tyger Auto Rider Running Boards is a 3.5-inch tube step for 2019-2026 Silverado and Sierra 1500 and 2020-2027 2500 and 3500 HD Crew Cab. If you want the Tyger name and warranty but prefer a slim round tube over a wide board, this is the shape to look at.

Tyger Auto LanderX Running Board is a drop-step design for the same Silverado and Sierra Crew Cab range. A drop step hangs lower at the door opening, which helps shorter passengers and kids climb in without a hop.

How to Choose Early Black Friday Running Board Deals

What should I check before ordering running boards?

Check your cab size first — it’s the number one reason a running board gets returned. Crew Cab, Double Cab, Extended Cab and Quad Cab aren’t interchangeable, and listings rule out specific ones by name. Then check your model year and trim, because LD, Limited and Classic versions of the same truck often don’t fit. Finally, use the Amazon Confirmed Fit tool with your license plate. It takes a minute and it confirms the fitment the seller is claiming for your exact vehicle.

How much weight capacity do I actually need?

Stated capacities here run from 450 lb to 500 lb per side, and that’s per bar, not for the pair. A 500 lb rating is the figure the listings state per side.

Does a wider board or a slim tube matter more?

It depends on how you use the truck. A 6-inch or 6.5-inch board gives a bigger target for your foot, which helps kids, older passengers and anyone in work boots. A 3.5-inch oval or 2-inch tube sits tighter to the body and keeps more clearance underneath, which matters if you leave pavement.

Will I need to drill holes in my truck?

Every pick in this article is listed as a bolt-on install with no drilling, and most cite around 20 minutes of work. The hardware and brackets come in the box, and the bars mount to the rocker panel using existing points. Some bars have a slider so you can shift position forward or backward before tightening everything down. The one thing to do first is confirm fitment — a no-drill install only stays no-drill if the brackets line up with your cab.

Related guides

• Running Boards for Chevrolet Colorado: Top Picks for 2026 Buyers
• Bolt-On Running Boards Ram 1500 Laramie – Best Buying Guide
• How to Choose Running Boards for GMC Sierra 1500: Expert Guide

FAQs Of Best Black Friday Running Board Deals 2026

What holds a running board onto the truck?

Brackets bolted to the rocker panel, using mounting points the truck already has. Every pick here includes its own brackets and hardware, and none of them require drilling. The COMNOVA AUTOPART Inches Running boards use four brackets per side in a non-welded design, which spreads the load across more of the rocker. The listed capacities are 450 lb to 500 lb per side.

What maintenance do running boards need?

Mostly cleaning, and the material decides how much. Aluminum and stainless steel resist rust better than carbon steel, so keeping the powder coat intact on carbon steel bars matters. Wash off road salt and mud before it sits.

What goes wrong first on a running board?

The finish, usually, and then the tube ends. Powder coat chips, and once it chips, bare steel is exposed to salt and water. Sealed endcaps keep water and dirt out, and step pads wear down over time.

Is a simple bolt-on bar enough, or do I need the adjustable one?

For most buyers, a plain bolt-on bar is plenty. The adjustable slider lets you move the step forward or backward to suit where your foot lands. If several people of different heights use the truck, the slider earns its place.

Conclusion

When the sales go live, check the fitment notes for your truck’s exact year, cab size, and bed length before you buy. If you’re unsure, message the seller your VIN. That’ll save you a return headache, and you’ll have them bolted on before the weekend’s over.